+48 690 447 858
OFFICE@SILOWAVE.FI
| Capacity | 17 tons |
|---|---|
| Volume | 26,7 m3 |
| Diameter | 2,3m |
| Height | 8,6m |
| Hopper angle | 60 degrees |
| Feeding line | Hole 44cm (standard) |
| Hopper/ground | 70cm |
| Foundation | 2,75 m x 2,75 m x gr. 40 cm |
Feed 17t
888,00 €
These silos are most often chosen for storing fodder for poultry, pigs and cattle. Such a silo is erected without a building permit, only a construction notification is required (up to 7m high). It is made of corrugated sheet, which stiffens the structure of the tank and ensures resistance to dents.
As standard, this silo is equipped with a 100 mm pipe for loading through the feed wagon, which is connected to the silo through a universal hydrant terminal. We use cast iron elbows with a 4 mm wall, thanks to which there is no possibility of chafing the pipe. Hydrant couplings are attached to the pipes with a thread.
Our silos can be used in the most extreme conditions, from – 30 to + 70 degrees.
Additional information
Related products
Feed 14t
These silos are most often chosen for storing fodder for poultry, pigs and cattle. Such a silo is erected without a building permit, only a construction notification is required (up to 7m high). It is made of corrugated sheet, which stiffens the structure of the tank and ensures resistance to dents.
As standard, this silo is equipped with a 100 mm pipe for loading through the feed wagon, which is connected to the silo through a universal hydrant terminal. We use cast iron elbows with a 4 mm wall, thanks to which there is no possibility of chafing the pipe. Hydrant couplings are attached to the pipes with a thread.
Our silos can be used in the most extreme conditions, from - 30 to + 70 degrees.
Feed 32t
These silos are most often chosen for storing fodder for poultry, pigs and cattle. Such a silo is erected without a building permit, only a construction notification is required (up to 7m high). It is made of corrugated sheet, which stiffens the structure of the tank and ensures resistance to dents.
As standard, this silo is equipped with a 100 mm pipe for loading through the feed wagon, which is connected to the silo through a universal hydrant terminal. We use cast iron elbows with a 4 mm wall, thanks to which there is no possibility of chafing the pipe. Hydrant couplings are attached to the pipes with a thread.
Our silos can be used in the most extreme conditions, from - 30 to + 70 degrees.
Feed 25t
These silos are most often chosen for storing fodder for poultry, pigs and cattle. Such a silo is erected without a building permit, only a construction notification is required (up to 7m high). It is made of corrugated sheet, which stiffens the structure of the tank and ensures resistance to dents.
As standard, this silo is equipped with a 100 mm pipe for loading through the feed wagon, which is connected to the silo through a universal hydrant terminal. We use cast iron elbows with a 4 mm wall, thanks to which there is no possibility of chafing the pipe. Hydrant couplings are attached to the pipes with a thread.
Our silos can be used in the most extreme conditions, from - 30 to + 70 degrees.
Feed 13t
These silos are most often chosen for storing fodder for poultry, pigs and cattle. Such a silo is erected without a building permit, only a construction notification is required (up to 7m high). It is made of corrugated sheet, which stiffens the structure of the tank and ensures resistance to dents.
As standard, this silo is equipped with a 100 mm pipe for loading through the feed wagon, which is connected to the silo through a universal hydrant terminal. We use cast iron elbows with a 4 mm wall, thanks to which there is no possibility of chafing the pipe. Hydrant couplings are attached to the pipes with a thread.
Our silos can be used in the most extreme conditions, from - 30 to + 70 degrees.
Feed 15t
These silos are most often chosen for storing fodder for poultry, pigs and cattle. Such a silo is erected without a building permit, only a construction notification is required (up to 7m high). It is made of corrugated sheet, which stiffens the structure of the tank and ensures resistance to dents.
As standard, this silo is equipped with a 100 mm pipe for loading through the feed wagon, which is connected to the silo through a universal hydrant terminal. We use cast iron elbows with a 4 mm wall, thanks to which there is no possibility of chafing the pipe. Hydrant couplings are attached to the pipes with a thread.
Our silos can be used in the most extreme conditions, from - 30 to + 70 degrees.
Feed 3t
These silos are most often chosen for storing fodder for poultry, pigs and cattle. Such a silo is erected without a building permit, only a construction notification is required (up to 7m high). It is made of corrugated sheet, which stiffens the structure of the tank and ensures resistance to dents.
As standard, this silo is equipped with a 100 mm pipe for loading through the feed wagon, which is connected to the silo through a universal hydrant terminal. We use cast iron elbows with a 4 mm wall, thanks to which there is no possibility of chafing the pipe. Hydrant couplings are attached to the pipes with a thread.
Our silos can be used in the most extreme conditions, from - 30 to + 70 degrees.
Feed 8t
These silos are most often chosen for storing fodder for poultry, pigs and cattle. Such a silo is erected without a building permit, only a construction notification is required (up to 7m high). It is made of corrugated sheet, which stiffens the structure of the tank and ensures resistance to dents.
As standard, this silo is equipped with a 100 mm pipe for loading through the feed wagon, which is connected to the silo through a universal hydrant terminal. We use cast iron elbows with a 4 mm wall, thanks to which there is no possibility of chafing the pipe. Hydrant couplings are attached to the pipes with a thread.
Our silos can be used in the most extreme conditions, from - 30 to + 70 degrees.
Feed 5t
These silos are most often chosen for storing fodder for poultry, pigs and cattle. Such a silo is erected without a building permit, only a construction notification is required (up to 7m high). It is made of corrugated sheet, which stiffens the structure of the tank and ensures resistance to dents.
As standard, this silo is equipped with a 100 mm pipe for loading through the feed wagon, which is connected to the silo through a universal hydrant terminal. We use cast iron elbows with a 4 mm wall, thanks to which there is no possibility of chafing the pipe. Hydrant couplings are attached to the pipes with a thread.
Our silos can be used in the most extreme conditions, from - 30 to + 70 degrees.